Black Mold Removal
Black mold removal is the contained removal of heavily colonised building materials, followed by HEPA filtration, antimicrobial treatment of salvageable surfaces and…
Read moreMold Remediation Services in Marietta, GA
Twenty remediation service lines organised by where the mold is, what material it is growing on, and which water event caused it. Every service follows the same sequence — source identification, containment, removal, treatment, structural drying and verified moisture readings.
How to choose
Not sure which service applies to your property?
Start with the cause rather than the symptom. If there has been a leak, a flood or an appliance failure, use the water-driven services. If there is growth with no water event you can identify, it is usually humidity, condensation or a concealed leak — and a moisture survey will tell you which. If you are not certain, call and describe what you are seeing.
Mold type and severity
Mold type and severity
Mold Odor Removal
Mold odor removal works by finding and removing what is producing the smell, not by masking it. A persistent musty odour means colonised material and trapped moisture…
Read moreBelow-grade and structural areas
Below-grade and structural areas
Basement Mold Remediation
Basement mold remediation addresses mold growth in basements at its cause: foundation moisture, groundwater seepage or standing water that has kept building materials…
Read moreCrawl Space Mold Removal
Crawl space mold removal treats mold in crawl spaces where it actually sits — on floor joists, subflooring and fallen insulation — and corrects the ground moisture and…
Read moreAttic Mold Remediation
Attic mold remediation deals with growth on roof sheathing and rafters caused by roof leaks, condensation or exhaust venting into the attic. We identify which of the…
Read moreRoom-specific remediation
Room-specific remediation
Bathroom Mold Removal
Bathroom mold removal goes past the grout line to the wall cavity, subfloor and vanity base where the moisture actually sits. We locate hidden water damage with…
Read moreKitchen Mold Removal
Kitchen mold removal targets the concealed spaces where appliance leaks collect: under sink bases, behind dishwashers and refrigerators, and in the subfloor beneath…
Read moreCeiling Mold Removal
Ceiling mold removal starts above the ceiling, not on it. Water staining and growth on a ceiling mean the cavity, insulation and joists above have been wet, so we…
Read moreWall Mold Removal
Wall mold removal addresses growth inside wall cavities, not just on the painted surface. We map the damp area with moisture meters, open only the affected section,…
Read moreFlooring and materials
Flooring and materials
Carpet Mold Removal
Carpet mold removal is decided by what is underneath. Carpet pad is a porous sponge that holds water against the subfloor, so it comes out; the carpet itself can…
Read moreDrywall Mold Removal
Drywall mold removal means cutting the affected board back to sound, dry material under containment, then treating and drying the framing behind it. Drywall is porous…
Read moreMoldy Insulation Removal
Moldy insulation removal takes contaminated batts and blown insulation out under containment so the framing behind them can be treated and dried. Wet insulation holds…
Read moreMoldy Flooring Removal
Moldy flooring removal takes up affected floor coverings and underlayment so the subfloor underneath can be cleaned, treated and dried. Floor assemblies trap moisture…
Read moreWater-driven remediation
Water-driven remediation
Water Damage Mold Removal
Water damage mold removal combines emergency water extraction and structural drying with remediation of materials that have already begun to grow. The sequence…
Read moreFlood Mold Remediation
Flood mold remediation treats floodwater as contaminated. Material that absorbed floodwater is removed rather than dried, surfaces are decontaminated, and the…
Read moreSewage Mold Remediation
Sewage mold remediation handles contaminated-water events: sewer line backups, drain backups and toilet overflows that introduce microbial hazards along with moisture.…
Read moreWet Basement Mold Removal
Wet basement mold removal is for basements with an active or recurring water problem rather than a single past event. We identify where water is entering, remove…
Read moreMoisture Mold Remediation
Moisture mold remediation is for growth caused by humidity and condensation rather than a leak. We measure where indoor moisture is accumulating, remove or treat…
Read morePost-Flood Mold Cleanup
Post-flood mold cleanup is for properties where the water has gone but growth has appeared since. The structure retained moisture after the flood, and that residual…
Read moreStorm Damage Mold Remediation
Storm damage mold remediation handles growth following wind-driven rain, roof damage and envelope breaches. Water that entered through the roof, a window or a damaged…
Read moreCoverage
Where we work in Marietta
Every service above is available across all of the neighbourhoods below, and throughout Cobb County.
- Downtown Marietta
- Marietta Square
- Forest Hills
- Whitlock
- Polk
- Dixie
- Austin
- Oakton
- Victory
- Frasier
- Fort Hill–Roosevelt
- Barrett Green
- East Worthington
- Hardage Farm
- Manget
- Cherokee Heights
- Lewis Park
- Lemon
- Meeting Park
- Marietta Walk
- Kennesaw Avenue Area
- West Dixie Area
- Church Street–Cherokee Street Area
- Washington Avenue Area
- Northwest Marietta
- Whitlock Avenue Area
- Atlanta Street–Frasier Street Area
Speak to a remediation specialist
Describe the problem and we will tell you which service applies
One call with a remediation specialist usually identifies the likely cause and the right scope. If an inspection is needed, the on-site evaluation is free.
24/7 Emergency Line
(770) 206-7911 Request EvaluationFree on-site evaluation. No obligation, no call-out charge.