Dishwasher leaks
Appliance malfunctions and supply or drain connection failures release water behind and beneath the unit, where it migrates under adjacent cabinet runs and flooring.
Kitchen Mold Removal in Marietta, GA
Kitchen mold removal targets the concealed spaces where appliance leaks collect: under sink bases, behind dishwashers and refrigerators, and in the subfloor beneath cabinet runs. We trace the leak, remove contaminated cabinetry and flooring, treat framing and dry the assembly before anything is rebuilt. Free evaluation in Marietta, GA.
- Service
- Kitchen Mold Removal
- Service area
- Marietta, GA and Cobb County
- Typical range
- $800 – $5,500 · confirmed on site
- Availability
- 24/7 emergency response
Kitchens fail quietly. A refrigerator water line leak, a dishwasher supply connection or a slow drain leak under the sink releases a small volume continuously into a cabinet base or under a floor covering. The cabinet hides it, the floor covering traps it, and by the time there is an odour or a soft spot, the particleboard base and the subflooring beneath have been wet for months.
Signs you need kitchen mold removal
- A musty odour when a sink or appliance cabinet is opened
- Swollen, delaminating or stained cabinet base or toe kick
- Buckled, lifting or discoloured flooring near the dishwasher or refrigerator
- Dark staining on the wall behind or beside an appliance
- Soft or springy flooring in front of the sink run
- Persistent dampness or water staining in the ceiling of the room below
If two or more of these are present, the underlying condition is usually larger than what is visible. A free on-site evaluation with moisture readings establishes the real extent before any work is scoped — call (770) 206-7911 to arrange one.
What causes it
Refrigerator water line leaks
Ice maker and water line connections drip slowly behind the appliance onto flooring and subflooring that never dries.
Sink base leaks
Plumbing leak cleanup under sinks is often delayed because the cabinet contains the water. Damp particleboard and the wall cavity behind it support growth out of sight.
Garbage disposal and drain failures
Drain backups and failed connections wet the cabinet base, flooring and toe-kick area, and the material stays saturated between uses.
Our process
How kitchen mold removal is carried out
Each step is documented, and the job closes on moisture readings rather than on appearance.
Leak source identification
Appliances are pulled and connections checked, with moisture readings taken through cabinet bases, flooring and the adjacent wall so the real extent is known.
Containment
The affected run is contained to keep particulate out of the rest of the kitchen and adjoining living areas during removal.
Removal of contaminated materials
Saturated cabinet bases, toe kicks, flooring and affected subflooring sections are removed. Particleboard that has been wet does not recover.
Antimicrobial treatment
Framing, subfloor and wall surfaces that remain are treated before reassembly.
Structural drying
Air movers and dehumidifiers dry the subfloor and framing, including cavities under cabinet runs where air exchange is poor.
Verification
Moisture content readings confirm drying completion before any reconstruction or cabinet replacement is scheduled.
Materials assessed
Building materials affected in this type of job
Removal is decided by material and by moisture reading, not by how the surface looks. Porous materials that have absorbed water are removed; non-porous and semi-porous materials are cleaned, treated and dried in place wherever that is appropriate.
- Cabinet bases and toe kicks
- Flooring and underlayment
- Subflooring
- Wall drywall behind appliances
- Wall framing
- Ceiling below the kitchen
Where a job overlaps with other work — a water source that also affected moldy flooring removal or wall mold removal — it is scoped as one project so nothing is left damp between two separate visits.
Kitchen Mold Removal cost in Marietta
$800 – $5,500
Typical range for planning. Final price confirmed after an on-site evaluation and discussed with you on the call.
- Accessibility, containment requirements and the volume of material removed all move the figure.
- Drying time is usually the largest variable, not the removal work.
- No final quote is given over the phone — the evaluation is free and carries no obligation.
Answers
Kitchen Mold Removal — frequently asked questions
Do the cabinets have to be replaced?
Solid wood boxes that have only been damp at the base can sometimes be saved. Particleboard and MDF cabinet bases that have absorbed water swell and lose structure, and they hold moisture against the subfloor, so those sections come out.
Can the dishwasher stay in place?
No. The area behind and beneath it has to be accessible for assessment, removal and drying — that space is normally where the affected material is.
How do I know the leak is actually fixed?
The leak source is identified during the assessment and documented. Drying verification follows the repair, so the readings confirm both that the material is dry and that it is staying dry.
Is a small amount of mold under the sink worth remediating?
If it is confined to a wipeable non-porous surface with a corrected leak, it may not be. If the cabinet base, flooring or wall cavity is wet, the porous material is the issue and cleaning the visible surface will not resolve it.
Coverage
Kitchen Mold Removal across Marietta
This service is available throughout Marietta and Cobb County. These neighbourhood pages cover the moisture conditions we see most often in each area.
Keep reading
Related mold remediation services
Water travels, so these jobs often come as a pair. If more than one applies, they are scoped together.
Speak to a remediation specialist
Arrange kitchen mold removal in Marietta
Describe what you are seeing and we will tell you what is likely behind it. If an inspection is needed, the on-site evaluation and written scope are free.
24/7 Emergency Line
(770) 206-7911 Request EvaluationFree on-site evaluation. No obligation, no call-out charge.